WIRELESS AND SWITCHING

Ubiquiti UniFi Installation and Consulting

We build managed networks with Ubiquiti UniFi access points, switches and UniFi gateways in offices, warehouses, hotels and shops. VLANs, Wi-Fi, guest network, firewall rules and remote management are configured in the UniFi Network application, and we take over and tidy up existing UniFi deployments.

UniFi Network

Documented Wi-Fi and switching, managed from a single console.

SCOPE OF SERVICE

What do we cover in a UniFi deployment?

We start by reviewing the floor plan, user and device count, existing cabling and any previous UniFi installation.

01

Gateway and management

The UniFi Network application on Cloud Gateway or Dream Machine series gateways or a separate UniFi OS server; all devices in one console with remote management.

02

Wi-Fi

Access point placement, channel and power settings, band steering, roaming settings, WPA3 and a guest portal.

03

Switching and VLANs

Port profiles, VLANs, PoE budget and uplink design.

04

Security and network separation

Zone-based firewall rules, separation of guest, camera and IoT networks, IDS/IPS settings and administrator accounts.

05

Multi-site setup

Managing multiple branches from UniFi Site Manager or a single application, with site-to-site VPN.

06

Backups and updates

Automatic configuration backups and a controlled firmware update policy.

COMMON SITUATIONS

What we see most often in UniFi deployments

01

Dropping Wi-Fi

Drops caused by high transmit power, wide channels and poor placement are identified through measurement and corrected.

02

Everyone on one network

Where guest, camera and staff devices share one network, they are separated with VLANs and rules.

03

Outdated controller

A controller application running unpatched on a PC is moved to a gateway or UniFi OS server.

04

Undocumented setup

Administrator accounts, the device list and the network layout are inventoried and documented.

PROJECT PHASES

How does the project proceed?

01 / STAGE

Discovery

Floor plan, device count, cabling and the existing installation are reviewed.

02 / STAGE

Design

Access point placement, VLAN and SSID plan, switch and gateway selection are prepared.

03 / STAGE

Setup

Devices are mounted, adopted and configured.

04 / STAGE

Validation and handover

Coverage, roaming and network separation are tested; administrator access and documentation are handed over.

DELIVERABLES

What do you receive at handover?

Access point placement plan, SSID and VLAN table, firewall rules, device list, configuration backup, administrator account list and maintenance recommendations.

FREQUENTLY ASKED QUESTIONS

Let’s clarify a detail

01

Is UniFi good enough for a business office?

It is common and sufficient in small and mid-sized offices, warehouses and hotels. For detailed 802.1X policies or very large campuses, enterprise vendors may also be considered.

02

Where should the UniFi application run?

In most deployments it runs on the UniFi gateway. If the gateway is from another vendor, a separate UniFi OS server or Cloud Key can be used.

03

Is there a per-device licence fee?

There is no annual per-device licence fee for the UniFi Network application. Some cloud services and add-on applications may be charged separately.

04

Can you take over maintenance of our existing UniFi network?

Yes. Monthly maintenance covers backups, firmware tracking, Wi-Fi performance and rule reviews.

ERETEK NETWORK

Let’s plan your UniFi network together

Share the floor plan and user count; we will work out access point placement and the device list.