Network and IP Planning · #10

Online Switch Port Capacity Planner

Calculates the switches needed per cabinet or location, keeping uplink/stack ports reserved.

  • Data is processed in your browser and not sent to a server
  • Export: CSV

Tool

One per line: Cabinet/location; Devices

Access ports (e.g. 24 or 48). Do not count separate SFP uplinks.

Copper ports kept free for uplink, stacking, APs or management.

What does this tool do?

Dividing the total device count as one pool gives wrong results: 49 devices in one cabinet need two switches, while 25 + 25 devices in two cabinets also need two, not one, because cables do not cross cabinets. The tool calculates each cabinet separately and subtracts uplink and stack ports from the usable ports.

How to use it

  1. Write Cabinet/location; Devices on each line.
  2. Enter the switch port count and the ports per switch to reserve for uplinks or stacking.
  3. Enter the growth margin and press Calculate.

Fields

Cabinet lines
One per line: Cabinet/location; Devices
Switch ports
Access ports (e.g. 24 or 48). Do not count separate SFP uplinks.
Reserved ports per switch
Copper ports kept free for uplink, stacking, APs or management.
Growth margin

Worked example

InputValue
Cabinet lines
Kat 1 - Kabin A;49
Switch ports48
Reserved ports per switch2
Growth margin0

Expected result: 49 devices, 48 − 2 = 46 usable ports per switch → 2 switches, 43 spare ports.

One switch takes 46 devices; the 49th needs a second switch, leaving 43 ports for new devices in this cabinet. If the reserved ports are not used for uplinks because the switch has dedicated SFP uplinks, set reserved ports to 0 and recalculate.

Second scenario

InputValue
Cabinet lines
Kat 1 - Kabin A;120
Kat 2 - Kabin B;40
Depo;8
Switch ports48
Reserved ports per switch4
Growth margin20

Expected result: Cabinet A: 144 devices → 4 switches; Cabinet B: 48 → 2 switches; Store: 10 → 1 switch; 7 switches in total.

Method and assumptions

Ports needed per cabinet = ⌈devices × (1 + growth)⌉. Usable ports = switch ports − reserved ports. Switches = ⌈needed / usable⌉. Spare = switches × usable − needed.

Cabinets are not pooled; each line is a separate physical point.

Using the result and troubleshooting

Check the switch count against the PoE Power Budget and Uplink Oversubscription tools: even with enough ports, PoE budget or uplink capacity can be the limit.

Use the Structured Cabling Quantity Calculator for patch panels and cable lengths.

Limits and common mistakes

  • Modular chassis or mixed switch models with different port counts are not handled in one run; run once per model.
  • It does not know whether stacking or uplinks use separate SFP ports; you decide with the reserved ports field.

Frequently asked questions

Why not divide the total in one go?

Cables do not cross cabinet boundaries. A pooled calculation would show 1 switch for 25 + 25 devices in two cabinets, although two are needed.

Related tools and service

Related service: Structured Cabling and Low-Voltage Infrastructure

Network online tools · See all online tools