Eretek Network · Enterprise network solutions

Enterprise Network Installation, Monitoring and Maintenance

We build wired and wireless networks in offices, factories and branches, and organize access between user and device groups. During commissioning we test the connections and backup paths, and hand the network plan over to your team.

Architecture design and installationSecure segmentationMonitoring and maintenance

01 · Wireless accessSite survey · coverage
02 · SwitchingRouting · redundant uplinks
03 · SegmentationVLAN · secure separation
OUR NETWORK SERVICES

Our network services

You can use the services below when building a new network, renewing existing infrastructure or investigating recurring connection problems.

01
network.eretek.com

Enterprise Network Consulting

We review the existing network and identify single points of failure and capacity problems. We plan the changes to make by risk, cost and order of implementation.

View the service →
02
network.eretek.com

Switch and Router Installation

We plan ports, VLANs, management access and backup links before commissioning. At the end of the installation we hand over the results of the connection and failover tests.

View the service →
03
network.eretek.com

Enterprise Wi-Fi Installation and Wireless Network Optimization

We measure coverage, channel use and client roaming in offices, warehouses and production areas. We decide the placement and settings of access points based on the devices on site.

View the service →
04
network.eretek.com

VLAN and Network Segmentation

We separate user, server, guest, camera and production networks. We decide which group can reach which service, and test during the cutover that the required access works.

View the service →
05
network.eretek.com

Metro Ethernet and Internet Line Management

We plan branch links and internet breakouts by capacity, carrier terms and physical route. We test the backup line and critical services for when the main line goes down.

View the service →
06
network.eretek.com

Structured Cabling and Low-Voltage Infrastructure

We plan the routing of copper and fiber runs, cabinet layout and port labels. At handover, we document the runs with test reports and port mapping lists.

View the service →
07
network.eretek.com

Network Performance Analysis and Troubleshooting

We compare interface counters, latency and connection logs at the moment of slowness and drops. Based on the findings, we investigate in which part of the network the problem starts.

View the service →
08
network.eretek.com

Network Maintenance, Monitoring and Periodic Checks

We track device availability, port errors and capacity. We regularly check configuration backups, software versions and the maintenance calendar.

View the service →
NETWORK ARCHITECTURE AND ENGINEERING

What do we plan in network design?

We decide the number of devices, link capacity and the backup paths to use in a failure together. In small networks, core and distribution functions can be combined in the same layer. In larger setups, splitting these functions into separate layers can make maintenance and capacity management easier.

Architecture design

We size core, distribution and access functions to the workload, capacity and redundancy target.

Secure segmentation

With VLANs, routing and access policies, we define clearly which traffic can go where.

Measurable performance

We track error counters, bandwidth use, latency and link status by measuring them.

DESIGN DELIVERABLES

Project handover documents

01 · Diagram

Physical and logical topology

Cabinet, device and connection layout; L2/L3 traffic flow.

02 · Plan

IP addressing and VLAN plan

Subnets, gateways, VLAN IDs and segment mappings.

03 · Table

Port and cable mapping tables

Patch panel, switch port and endpoint labels.

04 · Record

Configuration backups and change records

Versioned per-device backups and rollback notes.

INFRASTRUCTURE DESIGN

Topology, address plan and configuration backups are handed over together

OUR PROJECT APPROACH

A clear plan before implementation

Every step, from the site survey to the handover documentation, has a written and measurable output.

01

Current state

The physical and logical network, devices, connections and requirements are recorded on site.

02

Target architecture

An architecture sized to capacity, security, redundancy and growth requirements.

03

Controlled cutover

A maintenance window, a written rollback plan and staged configuration. A configuration backup is taken before the change.

04

Testing and handover

There is no handover until connectivity, access, performance and security tests are complete.

05

Monitoring and maintenance

Inventory, versioned configuration backups and regular health checks.

NETWORK OPERATIONS AND CONTINUITY

What problems do we monitor in the network?

We track port errors, frequently dropping connections and uplinks that fill up during busy hours. By reviewing counters and event logs together, we identify the changes that need action.

Device health

Regular tracking of core, distribution and access components with SNMP and device metrics.

Performance

Trend analysis of port usage, error counters and uplink capacity.

Configuration

Every change is recorded; a versioned backup is ready for rollback.

Scheduled maintenance

Lifecycle, firmware schedule and EoL/EoS planning.

Across Türkiye

Business network projects across Türkiye

We deliver business network projects across Türkiye. For factory, warehouse and office networks, we start with an on-site survey to measure wireless coverage and review racks and cabling. Installation and commissioning are done on site; monitoring, configuration backups and remote troubleshooting run over secure remote access. Our service areas.

LET’S PLAN TOGETHER

Let’s review your network infrastructure together

Let’s talk about your current topology, the problems you face and your priorities, and agree on the first step together.