4G/5G Backup Internet Line: CGNAT, Antennas and Signal Quality
How are VPN and inbound access affected when a mobile backup line takes over? Assess which jobs the line is suitable for through CGNAT, APN, signal quality and failover testing.
Dual internet lines, SD-WAN and MPLS, IPsec VPN, BGP multihoming, NAT, enterprise DNS, line quality measurement and 4G/5G backup lines.
How are VPN and inbound access affected when a mobile backup line takes over? Assess which jobs the line is suitable for through CGNAT, APN, signal quality and failover testing.
How do you prepare a common template for branch networks? We cover branch profiles, the device set, the address and VLAN layout, backup WAN and the opening checklist.
How do you measure that a WAN line is running at the committed quality? We explain measuring latency, delay variation, packet loss and availability with Cisco IP SLA, TWAMP and iperf3.
Calculate internet line capacity not by headcount but by application profile: a worked calculation, upload needs, the backup window and verification by measurement.
How should enterprise DNS be set up? We explain the distinction between resolver and authoritative server, internal and external views, TTL and DNSSEC, and the steps for separating layers during a fault.
How is NAT designed on an enterprise network? We cover NAT types, port exhaustion, reaching the external address from inside, overlapping subnets and rule order.
How is an IPsec VPN between branches designed? We explain the difference between policy-based and route-based tunnels, IKEv2 mismatches, the MTU problem and a backup tunnel with an example configuration.
How do you connect to two carriers with BGP? We cover the address and AS number process, route registry entries, settings that affect route selection and a filtered example.
What is the difference between Metro Ethernet service types? We explain E-Line, E-LAN and E-Tree, VLAN and MTU settings at handoff, the effect of rate limiting on throughput and the acceptance test.
SD-WAN or MPLS? We compare them on SLAs, application-based path selection, line diversity and the routing and MTU problems that can come up during migration.
For articles on other topics, you can browse the Knowledge Center.