ROUTING AND INTERNET EDGE

MikroTik Installation and Consulting

We install MikroTik routers, switches and wireless devices, configure RouterOS and tidy up existing MikroTik deployments. Multiple internet links and failover, VPN, VLANs, firewall rules, hotspot and management access are set up with secure settings, and the configuration is handed over documented.

RouterOS v7

Restricted management access, backed up and documented.

SCOPE OF SERVICE

What do we cover in a MikroTik deployment?

We start by documenting the device models, RouterOS version, internet links and existing rules.

01

Router and internet edge

PPPoE, static IP and DHCP links; NAT and DNS; load sharing or failover across multiple links with link monitoring.

02

Firewall and secure management

Leaving only required services open, restricting Winbox, WebFig and SSH access to the management network, disabling unused services, user groups and strong passwords.

03

VPN

Site connections and remote access with WireGuard, IPsec and SSTP; routing between sites.

04

VLANs and switching

VLAN design on CRS switches with bridge VLAN filtering and hardware offload; inter-VLAN routing on the router.

05

Wireless and hotspot

Central access point management with CAPsMAN, guest network, hotspot login page and bandwidth rules.

06

Monitoring and backups

Monitoring with SNMP or The Dude, regular configuration backups, RouterOS and RouterBOOT updates.

COMMON SITUATIONS

What we see most often on MikroTik devices

01

Management exposed to the internet

Unpatched MikroTik devices with management interfaces exposed to the internet have been used in large botnet attacks. Access is restricted and the version is updated.

02

Moving from RouterOS v6 to v7

Routing, OSPF and BGP, and wireless configuration changed in v7. The configuration is tested before upgrading.

03

Failover that does not work

Failover that only checks interface state does not kick in when the internet drops but the link stays up. Link monitoring uses real reachability.

04

Messy rule list

Rules added over the years are simplified, and ordering and address lists are cleaned up.

PROJECT PHASES

How does the project proceed?

01 / STAGE

Inventory

Devices, RouterOS version, links, rules and VPN definitions are recorded.

02 / STAGE

Design

The target configuration for failover, VLANs, firewall, VPN and management access is prepared.

03 / STAGE

Implementation

Changes are made with a backup and, where needed, using Safe Mode.

04 / STAGE

Testing and handover

Link failure, VPN and access tests are carried out; the configuration export and documentation are handed over.

DELIVERABLES

What do you receive at handover?

Configuration export and backup, link and routing table, VLAN and IP plan, firewall rule list, VPN definitions, administrator account list and maintenance recommendations.

FREQUENTLY ASKED QUESTIONS

Let’s clarify a detail

01

Is MikroTik suitable for business networks?

In terms of price and flexibility, it suits many businesses. It requires correct configuration and regular updates; since vendor support is limited, documenting the configuration matters.

02

Do you deploy CHR (Cloud Hosted Router)?

Yes. We install CHR on virtual servers or in the cloud, choose the licence level and configure VPN or routing.

03

Do you provide remote support?

Once secure management access is in place, configuration and troubleshooting are done remotely; new device installation is handled on site.

04

Can you take over maintenance of our existing MikroTik devices?

Yes. Monthly maintenance covers backups, RouterOS release and security tracking, rule reviews and log checks.

ERETEK NETWORK

Let’s discuss your MikroTik deployment

Share your device models, number of links and VPN requirements; we will work out the configuration and task list together.