Network and IP Planning · #10
Online Switch Port Capacity Planner
Calculates the switches needed per cabinet or location, keeping uplink/stack ports reserved.
- Data is processed in your browser and not sent to a server
- Export: CSV
Tool
What does this tool do?
Dividing the total device count as one pool gives wrong results: 49 devices in one cabinet need two switches, while 25 + 25 devices in two cabinets also need two, not one, because cables do not cross cabinets. The tool calculates each cabinet separately and subtracts uplink and stack ports from the usable ports.
How to use it
- Write
Cabinet/location; Deviceson each line. - Enter the switch port count and the ports per switch to reserve for uplinks or stacking.
- Enter the growth margin and press Calculate.
Fields
- Cabinet lines
- One per line: Cabinet/location; Devices
- Switch ports
- Access ports (e.g. 24 or 48). Do not count separate SFP uplinks.
- Reserved ports per switch
- Copper ports kept free for uplink, stacking, APs or management.
- Growth margin
Worked example
| Input | Value |
|---|---|
| Cabinet lines | |
| Switch ports | 48 |
| Reserved ports per switch | 2 |
| Growth margin | 0 |
Expected result: 49 devices, 48 − 2 = 46 usable ports per switch → 2 switches, 43 spare ports.
One switch takes 46 devices; the 49th needs a second switch, leaving 43 ports for new devices in this cabinet. If the reserved ports are not used for uplinks because the switch has dedicated SFP uplinks, set reserved ports to 0 and recalculate.
Second scenario
| Input | Value |
|---|---|
| Cabinet lines | |
| Switch ports | 48 |
| Reserved ports per switch | 4 |
| Growth margin | 20 |
Expected result: Cabinet A: 144 devices → 4 switches; Cabinet B: 48 → 2 switches; Store: 10 → 1 switch; 7 switches in total.
Method and assumptions
Ports needed per cabinet = ⌈devices × (1 + growth)⌉. Usable ports = switch ports − reserved ports. Switches = ⌈needed / usable⌉. Spare = switches × usable − needed.
Cabinets are not pooled; each line is a separate physical point.
Using the result and troubleshooting
Check the switch count against the PoE Power Budget and Uplink Oversubscription tools: even with enough ports, PoE budget or uplink capacity can be the limit.
Use the Structured Cabling Quantity Calculator for patch panels and cable lengths.
Limits and common mistakes
- Modular chassis or mixed switch models with different port counts are not handled in one run; run once per model.
- It does not know whether stacking or uplinks use separate SFP ports; you decide with the reserved ports field.
Frequently asked questions
Why not divide the total in one go?
Cables do not cross cabinet boundaries. A pooled calculation would show 1 switch for 25 + 25 devices in two cabinets, although two are needed.
Related tools and service
- PoE Power Budget CalculatorChecks per-port and total switch power for PoE devices separately.
- Uplink Oversubscription CalculatorCalculates the ratio of total downlink to uplink capacity normally and after losing one uplink.
Related service: Structured Cabling and Low-Voltage Infrastructure