Network and IP Planning · #06

Online Subnet Overlap Checker

Lists overlaps within the same VRF and deliberate reuse across VRFs separately.

  • Data is processed in your browser and not sent to a server
  • Export: CSV

Tool

One per line: Label; CIDR; VRF (opt.). A bare CIDR is also accepted. Up to 2,000 lines.

Lines without a VRF are counted in this VRF.

What does this tool do?

Branch roll-outs, mergers and VPNs often fail because the same address block is used in two places. A /25 defined elsewhere inside a /24 leads to unexpected route selection. Using the same block in different VRFs, however, is often a deliberate design. The tool separates the two cases.

How to use it

  1. Write Label; CIDR; VRF on each line. If the VRF is empty, the default VRF field is used.
  2. Press Calculate. Red rows are overlaps in the same VRF, yellow rows are reuse in different VRFs.

Fields

Subnet list
One per line: Label; CIDR; VRF (opt.). A bare CIDR is also accepted. Up to 2,000 lines.
Default VRF
Lines without a VRF are counted in this VRF.

Worked example

InputValue
Subnet list
Ofis;10.0.0.0/24;default
Yazıcı;10.0.0.0/25;default
Misafir;10.0.0.128/25;guest
Depo;10.0.1.0/25;default
Depo-2;10.0.1.128/25;default
OT;10.0.1.0/24;ot

Expected result: Office ⊃ Printers (same VRF, containment); Office and Guest share addresses in different VRFs (reuse); Store and Store-2 are adjacent and do not overlap; OT reuses Store/Store-2 space in another VRF.

The printer network is defined inside the office network, so two interfaces in the same VRF claim these addresses: an error to fix. Guest and OT are in separate VRFs and may be by design; check them again if routes are leaked between VRFs or NAT is used.

Method and assumptions

Each line is reduced to its network address and compared as a [first, last] range. Identical ranges are 'exact match', one inside the other is 'containment', no common address is 'no overlap'. Adjacent blocks (10.0.0.0/25 and 10.0.0.128/25) do not overlap.

Pairs are compared within the same address family. A different VRF is counted separately as 'reuse'.

Using the result and troubleshooting

Red rows state which block is wider; usually the narrower block should move or the wider one should be split. The VLAN and VLSM IP Planner can produce a new layout.

Assess yellow rows together with inter-VRF route leaking, shared-services VRFs or NAT.

Limits and common mistakes

  • It compares the inventory you enter; it does not check what is actually configured.
  • Lines with host bits set are converted to the network address.

Frequently asked questions

Is the same block in different VRFs an error?

No; it is normal in L3VPN and multi-tenant designs. Problems start when those VRFs meet in one routing table.

Related tools and service

  • VLAN and VLSM IP PlannerSplits one parent block into several VLANs; returns subnet, gateway, DHCP range and spare capacity per VLAN, with XLSX export.
  • CIDR AggregatorReduces a CIDR list to the smallest number of prefixes that cover exactly the same addresses.

Related service: VLAN, Routing and Network Segmentation

Network online tools · See all online tools